Tips On Finding The Right Running Water Belt


running water belt

There are running belts for nearly every type of trail mix available. However, most are constructed poorly and usually break easily. These belts can be purchased for under a hundred dollars, but the better ones will run well over two thousand dollars. Regardless of whether you need one for your ATV, snowmobile, golf cart, go-kart, or another vehicle, it is important to purchase a high-quality belt that will last.

Waist-High Belt

A body of water surrounded by trees

In my personal opinion, there is only one type of running water belt, and that is waist-high. They are comfortable to wear and allow you to stay hydrated on the run. Unfortunately, many of these are poorly constructed and never quite meet the needs of their users. As runners, we know how important it is to stay hydrated and have a way to carry our water bottles along with us. Having a belt that will go over your hips will give you the freedom to keep your upper body positioned in the saddle, allowing you to keep your core and hip muscles engaged as you go forward.

Many Ordinary Belts Are Too Big

A sunset over a body of water

The major problem with many runners who use ordinary running belts is that they are too big, too small, or both. If the design of the belt is not ideal for your size, it will work poorly. It will either cut off your circulation or fall between your shoulders as you bounce around in the trail. Also, the materials used on these running belts are not designed to provide a good fit. Frequently, manufacturers fail to use the proper sizing techniques, resulting in the material being too loose or too tight, causing discomfort and being uncomfortable to wear.

Make Sure You Get A Proper Fit

There are some things to look for to ensure a proper fit. First, check the length between the largest part of your hips to the smallest part of the back of your thighs. The distance should be one half to one-third of an inch. If it is longer or shorter than this, the manufacturers are probably selling you an inappropriate running water belt hydration belt. Also, keep in mind that the manufacturer recommends using only bottles within the recommended dimensions, not bottles with odd dimensions, since they may cause you to spill and cause the fuel belt to slip off.

When you are trying out running belts, try them on at home to make sure they will fit properly. Fit the entire belt inside your pants, making sure there is enough room to wiggle your leg and pant legs freely. Also, measure your ankle to your knee since this will ensure the running water belt has enough space to get around your shin. Finally, check the inside of the fuel tank to make sure it is the same distance from the smallest to the largest part of your torso, also ensuring that your waist is securely fastened in place. Manufacturers are required by law to provide a standardized size for these fuel tanks, so it will be helpful if you can match the inside dimensions of the tank to your measurements.

Avoid Having Backpacks While Running

It is always best to avoid any backpacks while running, as this could easily cause you to spill your bottles. Instead of placing your running belts inside your backpacks, it is better to place them between your legs, directly under your waistline. This way, you will prevent the possibility of spillage. If you must put your running belts inside your backpacks, make sure you purchase some high-quality adalid gear hydration belts made specifically for running belts.

If you have already purchased a Nathan water-resistant running belt, then you should look for a Nathan water-resistant water bottle holder that comes with it. The water bottle holder has two holes made to fit over a water bottle, preventing it from spilling. Because it is water-resistant, it will also eliminate the risk of your water bottle breaking on the ground. You also have the option of purchasing one with a built-in lip, which allows you to use a bottle without having to place it in the holder.

Final Words

One other thing to consider when purchasing a belt is whether or not it is large enough. Your jogger’s water belt must fit snugly instead of feeling like it is too loose. This will help prevent possible sprains and tears during running. Also, keep in mind that if you buy a belt made of a material other than plain nylon, you may run into problems with chafing and rubbing. This is why you should opt for a thicker material like a letterbox.

Subscribe to our monthly Newsletter
Subscribe to our monthly Newsletter